The Bindapt Thermostat Controller is the most cost effective way to run your construction heater. Set your desired temperature and the thermostat controller will turn your heater off when that temperature is reached.
The Bindapt Thermostat Controller is ideal for Grain Drying and some of our customers are also experimenting with other Agriculture use, including reducing humidity in potatoes, mushroom and hemp drying solutions.
The Bindapt Thermostat was primarily designed to be a safer method for grain drying applications. The Thermostat in combination with the Adapter Plates creates an efficient grain drying solution. The temperature probe is installed into the aeration plenum closest to the grain and will read the output temperature of the fan.
The Thermostat can be set to a specific temperature and be given a threshold. The threshold is amount of variation in temperature before the thermostat turns the heater on again. We ship the thermostat with a 3 degree Celsius variation, but this setting is easily changed.
*NOTE: Due to limitations with the Herman Nelson Frost Fighter Heaters there are additional components used to make the system work properly. Unfortunately the additional component is at an additional cost to us and in order to serve the Frost Fighter market an additional $50 is required to make Bindapt and Bindapt+ work with that specific heater.
Contact Adaptive Agriculture: 306-850-1259 for more information and a quote today!
- Bindapt Thermostat Controller (compatible with Flagro and Frostfighter heaters)
- Grain Drying with Bindapt Drying Guideline manual.
- Ask about our Internet enabled SMART thermostat (Bindapt Plus / Pro)